Storm damage is not always obvious from the ground. Missing shingles, fallen branches, and visible leaks are easy to notice, but smaller problems—such as lifted flashing, bruised shingles, or moisture beneath attic insulation—can worsen if they are overlooked.
After a strong thunderstorm, high-wind event, hailstorm, or remnants of a tropical system, residents should inspect the property from the ground first, then check accessible interior areas. The goal is to identify warning signs without creating additional safety risks.
What should be checked first after a storm?
Begin with personal safety and a wide view of the property. Do not climb onto the roof immediately, especially if surfaces are wet, debris is present, or power lines are down.
Walk around the home and look for:
- Shingles on the ground, driveway, deck, or lawn
- Broken limbs resting on or near the roof
- Sections of roof that appear uneven, raised, or rippled
- Damaged gutters, downspouts, soffits, fascia, or exterior trim
- Water stains on siding or around windows
- Granules collecting near downspout outlets
- Loose vents, chimney covers, or other roof-mounted components
Use binoculars or a phone camera with a zoom feature if the roof is difficult to see. A ground-level inspection is safer than walking on roofing materials and can reveal many serious problems.
How can missing or lifted shingles be identified?
Missing shingles usually leave visibly exposed areas of the roof deck or underlayment. A small patch of exposed material may be noticeable from the ground, particularly on roof edges, ridges, and corners.
Lifted shingles may be harder to spot. Look for:
- Shingle tabs that appear raised or curled
- Uneven rows
- Dark lines where adhesive strips have separated
- Shingles hanging over the roof edge
- Exposed nail heads or underlayment
- Areas that look smoother or lighter than surrounding sections
Wind often affects roof edges, ridges, and areas around penetrations first. A shingle can remain in place while its seal has broken, leaving it vulnerable to later wind and water entry. Do not attempt to press, nail, or glue shingles back into position from a ladder or rooftop. Temporary repairs can be unsafe and may conceal the extent of the damage.
What does hail damage look like?
Hail damage is not always visible immediately. It may appear as small dark marks, shallow dents, or areas where the protective granule surface has been knocked away.
Inspect accessible views of:
- Asphalt shingles
- Metal flashing
- Gutters and downspouts
- Window screens and exterior trim
- Air-conditioning equipment
- Painted surfaces and outdoor fixtures
On asphalt shingles, hail may leave circular or irregular depressions. The damaged area can look soft or bruised, but examining it closely often requires walking on the roof, which is not advisable for an untrained person. Granule loss in gutters does not prove that hail caused roof damage, but it is a useful reason to inspect the roof more carefully.
A common misconception is that hail damage must be large or dramatic to matter. Small impacts can weaken the shingle surface and reduce its ability to shed water over time.
How can a storm cause roof leaks without visible interior dripping?
Water may enter beneath shingles or flashing and travel along roof framing before appearing in a ceiling or wall. A leak can therefore show up several feet away from the actual entry point.
Inside the home, check the attic if it can be reached safely. Use a flashlight and look for:
- Wet insulation
- Darkened wood or water marks
- Damp roof decking
- Rust around nails
- Drips or beads of water
- Musty odors
- Daylight visible through the roof structure
Then inspect upper-floor ceilings, walls, closets, and areas around skylights or chimneys. Fresh stains, bubbling paint, peeling wallpaper, and soft drywall may indicate moisture.
Do not assume an old stain is harmless. A dry mark may be from a previous event, but comparing it with recent weather and checking for dampness can help determine whether the problem is active. Avoid touching wet electrical fixtures, wiring, or ceiling areas that appear swollen.
What should be done if a tree or large branch hits the roof?
Large debris should not be removed from the roof without evaluating the structure beneath it. A branch may be holding damaged roofing materials in place, or its weight may have affected rafters, trusses, decking, or ceilings.
From the ground, look for:
- Sagging roof sections
- Cracked or displaced framing visible in the attic
- Doors that suddenly stick
- New gaps around ceiling surfaces
- Broken rafters or trusses
- Debris that has penetrated through the roof
If the roof is sagging, the attic structure is visibly broken, or the ceiling is bulging, keep people away from the affected area. Structural damage and large debris require specialized equipment and should not be handled as a routine inspection.

Are gutters and flashing part of the roof inspection?
Yes. Gutters and flashing are essential parts of the roof drainage and water-shedding system.
Check whether gutters are:
- Pulled away from the fascia
- Bent or cracked
- Blocked by roof debris
- Holding standing water
- Separating at joints
- Discharging water against the foundation
Inspect flashing around chimneys, vent pipes, skylights, roof valleys, and wall intersections. Look for lifted edges, gaps, dents, rust, or pieces that have shifted out of place.
In older homes and homes with additions, roof sections may meet at several angles. These transitions deserve special attention because stormwater can enter through a small flashing failure even when the main roof field appears intact.
When is a roof inspection unsafe?
Do not climb onto a roof when it is wet, icy, steep, visibly damaged, covered with debris, or near electrical hazards. Ladders should not be placed against unstable gutters or slick surfaces.
Extra caution is needed if:
- Power lines are down or touching the home
- The roof structure appears to sag
- A ceiling is bulging
- Water is near electrical equipment
- The attic contains exposed wiring or unstable framing
- A tree is leaning against the house
- Strong winds are continuing
A roof can be damaged even when it looks walkable. Wet asphalt shingles are slippery, and hidden structural damage may not support a person’s weight.
How should storm damage be documented?
Take photographs from the ground and from safe interior locations before moving debris or making repairs. Capture wide views that show the affected roof section as well as close views of individual problems.
Useful records include:
- The date and approximate time of the storm
- Types of weather observed, such as wind, hail, or heavy rain
- Locations of fallen branches or roofing pieces
- Interior stains or damp materials
- Damaged gutters, vents, flashing, and siding
- Any temporary steps taken to limit water entry
If water is actively entering the home, place containers beneath drips and move furniture away from the area when it is safe. Do not puncture a bulging ceiling; water may be collecting above it.
How soon should damage be addressed?
Visible openings, active leaks, exposed underlayment, and damaged flashing should be treated as time-sensitive because additional rain can increase interior damage. Temporary protection may be appropriate, but it should be installed only when it can be done safely.
For households in Ashland, changing weather through spring and summer can make a minor opening more consequential if another round of rain arrives before repairs are completed. After severe storms, checking the roof again a day or two later can also reveal delayed leaks, shifted debris, or moisture that was not visible during the first inspection.
A careful inspection does not require walking on the roof. Ground-level observations, attic checks, interior moisture signs, and photographs can provide useful information while reducing the chance of injury.